1. For Android: If you are using for the android car radio (DPX8060PB support 1080P&720P) from OneCarStereo, install it directly according to the instructions in the diagram, without cutting the white coil, and support AHD 1080P with reverse assist line.
2. For Linux: If you are using for the Linux car radio (DPS8060BE & DPS8011TE support 720P) from OneCarStereo, cutting the white coil firstly, then install it according to the instructions in the diagram, and support AHD 720P with reverse assist line.
3. 1080P&720P dual switching function: OneCarStereo AHD camera has a closed white coil after purchase, which supports 1080P. When the white coil is cut off, it supports 720P. If you want to restore 1080P, you can manually connect the white coil together.
【For Linux】
If you are using for the Linux car stereo (DPS8060BE) from OneCarStereo, cutting the white coil firstly, then install it according to the instructions in the diagram, and support AHD 720P with reverse assist line.
【For Android】
If you are using for the android car stereo (DPX8060PB support 1080P&720P) from OneCarStereo, install it directly according to the instructions in the diagram, without cutting the white coil, and support AHD 1080P with reverse assist line.
You may also like
FAQs
A1.
(a) Tap the CarPlay icon on the stereo's main menu.
(b) Enable Wi-Fi and Bluetooth on your iPhone. In the Bluetooth list, find and select "CarKit-xxxx" to pair (if a PIN code is required, try 0000).
(c) A prompt will appear on your iPhone asking to "Allow Contacts and Favorites Sync." Tap "Allow."
(d) Another prompt will appear asking if you want to "Use CarPlay with IVT." Tap "Use CarPlay," and the stereo will automatically switch to the CarPlay interface.
A2.
(a) Click the Android Auto icon on the car stereo's main menu.
(b) First, turn on Wi-Fi and Bluetooth on your phone. Pair a new device, find the Bluetooth name "CarKit-xxxx" in the list, and click to pair (if a PIN code is needed, try 0000).
(c) A prompt to "Pair with CarKit-xxxx" will appear on your phone; please click "Pair."
(d) Another prompt asking "Allow access to messages?" will appear; please click "Allow." The stereo will then automatically enter the Android Auto interface. When powered on, the stereo will attempt to reconnect to the last connected phone automatically.
A3. * iPhone MirrorLink allows video, audio, and pictures to be transmitted from an iPhone to the stereo. The transmission is carried via Wi-Fi, which is fundamentally different from Bluetooth.
(a) Tap the AirPlay icon in the screen projection menu.
(b) Connect to the Wi-Fi network named "CarPlay_wifi_xxxx" with the password 12345678.
(c) Open the iPhone Control Center and long-press Screen Mirroring.
(d) Tap the "car" option and wait a few seconds for the automatic connection.
A4.
(a) Tap the “MiraCast” option in the screen projection menu and select “Mirror” under Android.
(b) Scan the QR code to download the APK and install it on your phone.
(c) Enable permissions for the app, including allowing it to "Appear on top."
(d) Turn on your phone's hotspot, name it "car", and set the password to 12345678.
(e) Open the Phone Mirror app on your phone and start the screen mirroring.
A5.
When you've connected your device to CarPlay and wish to switch to MirrorLink, you'll need to first disconnect or "forget" the existing Wi-Fi connection on the device. This step is Necessary because CarPlay and MirrorLink use different communication protocols and cannot operate simultaneously over the same Wi-Fi network. By disconnecting the Wi-Fi connection used for CarPlay, you ensure that the device can establish a new, uninterrupted connection with MirrorLink.
We recommend following specific steps to properly disconnect and reconnect your device to facilitate a smooth transition between the two systems.